Emergency Water Calls, Any Hour
The first few hours decide how large the job becomes. Water wicks up drywall, swells particleboard subfloors, and soaks into carpet pad faster than most people expect. Within a day or two, a clean-water loss can turn into a mold job. That is why the phones are staffed all night and emergency calls go right to the closest contractor on duty.
An emergency visit normally begins with the crew confirming the source is off and the space is safe. They make sure the water is off, decide whether wet circuits need to be shut at the panel, and begin extraction with portable or truck-mounted gear. In a flooded basement or crawlspace, that often means a submersible trash pump goes in first. Then come moisture readings, a thermal camera sweep to see where the water traveled, and the first round of air movers and LGR dehumidifiers.
When the first visit wraps up, a few things should be clear to you. You should know which rooms are wet, what category of water is involved, and which materials can be dried in place versus removed. You should also know when the contractor plans to return to take readings and adjust the equipment. Three to five days of drying is typical, but hardwood floors, plaster walls, and stone foundations can stretch that out. Keep the machines on, the windows closed unless the pro says to open them, and the thermostat where it was set.
- Burst pipes, failed supply lines, and water heater leaks
- Storm water, roof leaks, and window well flooding
- Sump pump failures and basement seepage
- Nights, weekends, and holidays handled the same way




